Product Overview
We worked closely with Eminence Speaker to develop the drivers found in most of our cabinets. Starting with the 12S back in 2009, all the way through the 24SV. We always made our cabinets with high-quality plywood. A few years after launch we upgraded the 1x12 and 2x12 cabinets to the + versions which included removable rear panels and our MicSim direct output on XLR, which was developed by our pal Doug Roberts. As a companion to the Vintage-voiced 20HV we also issued a vertical slant 2x12 known as 24SV. This was initially available with Celestion V30 which were ultimately replaced with our own Vintage-voiced custom Eminence.
Not shown here, we also for a time build both straight and slant 4x12 cabinets.
24S+ features two 12" Eminence custom speakers, removable rear panels, and an integrated MicSim speaker-emulated output. Mic the custom-voiced Eminence drivers traditionally or take the MicSim output directly to the board via XLR. The 24S+ has a 1/4″ Thru output that allows you to power a second cabinet in parallel, a convertible back baffle that allows for closed or partially open-back operation and switchable mono/stereo operation. All of this in a high-quality all-plywood cabinet.
-
Inputs: 1x8ohm for mono or 2x 16ohm for stereo operation
-
Outputs: 1×1/4″ Thru speaker output, 1xXLR speaker-emulated direct output
-
Power handling: 200 watts RMS mono or 100 watts RMS per channel for stereo operation
-
Cabinetry:Multi-ply, void-free hardwood
-
Speakers: 2×12” Jet City Custom Eminence
-
DIMS: 20″Hx28″Wx12″D
-
Weight: 40.2lbs net
12S+ is loaded with a single 12" Eminence custom speaker, removable rear panels, and an integrated MicSim speaker-emulated output. Send the MicSim output directly to the board via XLR for recording or live application. The 12S+ also has a 1/4″ Thru output that allows you to power a second cabinet in parallel, a convertible back baffle that allows for open, closed, or partially open-back operation. All of this in a high-quality all-plywood cabinet.
-
Inputs: 1x16ohm
-
Outputs: 1×1/4″ Thru speaker output, 1xXLR speaker-emulated direct output
-
Power handling: 100 watts RMS
-
Cabinetry:Multi-ply, void-free hardwood
-
1×12” Jet City Custom Eminence Speaker
-
DIMS: 20″Hx20″Wx12″D
-
Weight: 27 lbs net